• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Whats everyone working on?

A little project I picked up last month. Had a couple bent valves :rolleyes:

What bent the valves? Here still doing motor mounts. Passenger easy ds with headders and ps more fun. Ended up doing Spool mounts not Impressed with the china knockoffs very thin and they just squish things to fit. Hope all is well.
 
Not my style, nor would I build one for myself. But he's a three-peat customer.
Hopefully I'll finish it this week and get back to my mopars.

20210823_154627.jpg 20210823_154716.jpg
 
What bent the valves? Here still doing motor mounts. Passenger easy ds with headders and ps more fun. Ended up doing Spool mounts not Impressed with the china knockoffs very thin and they just squish things to fit. Hope all is well.

I bought the truck knowing it had bent valves. The one timing chain on the left bank jumped as the result of a broken tensioner. The 4.7 is an interference engine (only the intake valves).

I bought the truck on Thursday, went to Chryslers at Carlisle on Friday and found both heads, new re-manufactured, for $200. I couldn't go wrong :). I'm just glad I don't have to work on this newer stuff for a living.
20210721_164606.jpg

20210720_225449.jpg
 
Last edited:
To answer spacing motor mounts probly on a tough side cut some 1/2 ar500 and the back tab needs 3/16.
 
Easier question would be what am I not working on! I rebuilt my motorcross track 2 weeks ago so I'm still cleaning up after that (brush, tree roots and smoothing out the dirt) and adding drainage.

Still trying to wrap up my dad's truck. I bought an LMC exhaust kit for it that really disappointed me so I'm cutting it all up and redoing the whole thing.. they had it looping under the frame and running down the outside!
IMG_20210810_205746060_MP_copy_1641x2188.jpg


Putting in a swing set, footer is in..
IMG_20210821_191737088_MP_copy_1673x1254.jpg


Getting the Charger ready for some touch up paint.
IMG_20210817_194401725_MP_copy_1943x1457.jpg


The main objective is to clean my slate well before winter so I can 100% focus on my daughter's Mopar project.
 
I'm getting ready to take a healthy ****, thank you!
 
4th windshield AMD sent, is a charm.
20210924_221228.jpg
20210924_221235.jpg
 
Auto Transport Service
Back
Top