Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
What is the installed height of the windshield ? The windshield on my car appears to be about 1/4" below surrounding structure. I have not tried installing the trim, but it looks like there would be a significant gap between the glass and trim.
I believe there's a block that goes under it to hold it center when it gets mounted the bottom will have more room for forgiveness with that big strip . I can mesure my glass tomorrow I have one out in the shed
Hello, I was wondering if anyone has information or measurements regarding my question. Does the windshield have to be even with the surrounding structure to properly install the trim ? I will be removing my windshield in the near future to replace my dash and would like to reinstall the windshield correctly when done. Previous owner put it in with clear silicone, which just squished flat to the A pillar.
Thanks
I do not have any rubber blocks under the glass. The PO installed the windshield with clear silicone which squeezed flat to the mounting area of the a-pillar. The windshield, as it is right now, is about 3/8 on an inch below outside a-pillar height. I would think that the windshield would be even with the outside a-pillar height, so that the trim will be even and flat against the windshield.
Thanks