lift installation question..... and tips?

[eldubb440]

From what I'm reading my suggestion would be do as your mentioning but I'd favor the lift towards the garage door so the nose of your car would be inside but the lift still isn't. That not being a load bearing wall I'd definitely open that door up too.

I figure what ever end of the car I'm working on can be positioned toward the shop..... I would like the option of closing the door with a car on the lift for storage purposes; one on the lift and one under it. I know 20' isn't ideal, but it's what I have to work with, I may go 22'; that puts me 6 ' from the fence....... the door opening is 10', not messing with that any time soon.

 

[eldubb440]

I see a spot you could put it right there where the X was sitting before you shipped it west to my shop...

GTX or AMX?..... I think I know the answer

 

[flypaper]

something like that ......

give them a cut from the grow operation
and all is good?

 

[eldubb440]

give them a cut from the grow operation
and all is good?

fukkers always have their hands out

 

[PP1RT]

GTX or AMX?..... I think I know the answer

Ayup. Not an AMC fan...kinda narrows it down...

 

[eldubb440]

Ayup. Not an AMC fan...kinda narrows it down...

neither am I really ...... one day one follows you home, next thing you know the place is crawling with them

 

[eldubb440]

I live for overkill....... I whipped a set of these together in a day; it was fun and didn't cost a dime......

I had everything in stock, lol........ instead of buying anchors, borrowing a 1/2 inch hammer drill, and wasting a day running around. They will be in place prior to the pour, flush with the surface. Probably gonna be sitting on 2 other pieces making them 8 inches deep. Gonna install caps to keep concrete out of the threads and bolt areas.