• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

67 Plymouth spring and mini tub mod

Few questions:poke: What made you go to a glide? Are you installing frame connectors?? Will you be autocrossing or drag racing?
Asking for a friend..............:rofl:
 
Pg because my trans was at the point where I'd spend double the price to have a clean neutral with a brake. My trans guy builds all of our dragster and door cars. I also was at the point of needing an sfi bell for safety . So I went to the dark side a little bit. Auto cross probably not, sub frame connectors yes and I've had them for about18 years.
 
Asked about the connectors as your installing a bar. I've seen the bar plated OR through the floor to the connectors for strength. I also would think your car would 60ft better with 3 speeds. What is your goal for ET?
 
My subframe connectors are from Mancini racing and they do not go through the floor. They bolt to the front and rear frame. Not sure what 60ft will be, my best before was 1.55. 6.90s 1/8 100mph on 26x9s with 4.10. I've read pg uses less hp to move and only need to shift once. So I really dont know what is going to happen. I would happy running low 6.30s I've made changes all over the car so....
 
My main hoop welds to the rocker with 6x6 plates, as do the other bars.
 
440source 543 stroker 11.92 cr
Isky red lifter ,comp cam solid roller
Hughes cnc max wedge victor 440
Hughes m1 mopar cnc4150 intake
Hughes 1.6 rockers
440 source balancer
Milodon external pick up
Arp throughout
Coyles hex adjust chain
Aluminum water pump and housing forgot brand
440source aluminum pulleys
 
HEMI-ITIS said:
Few questions:poke: What made you go to a glide? Are you installing frame connectors?? Will you be autocrossing or drag racing?
Asking for a friend..............:rofl:
Click to expand...
Screenshot_20191027-202624_Facebook.jpg
 
Damn that really let loose hope the driver is okay
 
Yes he is, that's the 3rd one that I know of this year.all 3 caused a lot of body damage. The one before this was a cuda the tc went through the p/s door
 
Looks like a blanket in store for this transmission. I get the glide deal even the stock glide was damn near bullet proof not to mention the low gear 1 it had in it.
 
That's good at least you know your toes are good to go. Just kidding you are building a great ride been following you and thanks for the heads up on everything. Time to see some slips soon for you
 
Transmissions need to be upgraded as the power levels go up. As well as U-joints,shaft hoop, billet drums,shields or blankets . I climbed up and broke plenty of parts along the way.
 
HEMI-ITIS said:
Transmissions need to be upgraded as the power levels go up. As well as U-joints,shaft hoop, billet drums,shields or blankets . I climbed up and broke plenty of parts along the way.
Click to expand...
Yes, it's part of racing. Parts will brake, even new parts. I'm trying to set my car up a safe as possible. I'll probably never see the 9 second range, but I figure if I make it safe for 9s then I should be good.
 
HEMI-ITIS said:
Transmissions need to be upgraded as the power levels go up. As well as U-joints,shaft hoop, billet drums,shields or blankets . I climbed up and broke plenty of parts along the way.
Click to expand...
1350 joints are a must
 
You must log in or register to reply here.

Similar threads

Offender
  • Locked
SOLD 1968 Sport Satellite Convertible Resto Mod project
Replies
0
Views
2K
Offender
Offender
N
Which mini tub kits offers more room?
Replies
10
Views
2K
gkent
gkent
Mike Gaines
  • Locked
SOLD 1968 DART
Replies
0
Views
3K
Mike Gaines
Mike Gaines
Mike Gaines
  • Locked
FOR SALE 1966 Coronet Pro-Street
Replies
1
Views
4K
Cranky
Cranky
P
Spring relocation and mini tubbing a 62 fury
Replies
1
Views
788
dvw
dvw
Auto Transport Service
Back
Top