Exterior trim speed nut rubber seals

[Snook]

I'm putting the car (66 Coronet) back together and my existing seals are shot. These rubber seals slide over the pillar trim speed nut posts on the trim pieces. I've searched to no avail and may be forced to use some butyl in their place. Any ideas?

snook

 

[SgtSuperbird]

I'm putting the car (66 Coronet) back together and my existing seals are shot. These rubber seals slide over the pillar trim speed nut posts on the trim pieces. I've searched to no avail and may be forced to use some butyl in their place. Any ideas?

snook

Look up 3M rope caulk. It's thin and comes in strips. Break off a piece and form it into the nut. I've used this before on '70 applications, for the "PLYMOUTH" lettering, etc.

 

[snakeoil24]

althea fasteners has it look em up on ebay located in florida

 

[Snook]

Thanks guys, much appreciated!

snook

 

[69bfan]

If your looking for a sealer to go around a stud as found on body clips or other trim pieces, ask for "mastic sealer" and used with some Pal or barrel nuts. It comes in a variety of thickness and diameters. If I had known, I could have sent you some with the other clips that I sent out to you Snook.