• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

What did you do to your Mopar today?

Went to the JY, one I haven't been to in a while.

Had a 77 Cordoba. Got some trinkets P/W switch leads, mirror joystick nuts, etc...

Had a running 400, but missing the TQ 4 BBL.

Going back to buy the 400 and 727 complete with all accesories, pulleys, brackets and mounts and driveshaft~~~$500

Now I can begin "Project 451" Bwahahahaha!!!
 
Got home from being out of town for a week around 2 pm today. Fired it up and was on the road by 4:30. Had a nice ride put it away and it rained 30 min after I put it up.
 
Wired a light to turn on when my line lock is activated and installed a switch to go from the hot and cold temp sensors on my trans cooler lines.
 
Put some custom made emblems on the side of the 6pak hood scoop on my ride. approx 1" x 4"s majority says 493 under that is my license plate 1 MEAN66. made in mich. by Jeff Randall. If I wasn't so computer stupid I would send a picture, put have no idea how to get them from the phone into this thing so I can send them. Cars is pink (FM3) with satin black lift off hood (19lbs.) Waiting for the new bumpers to arrive. Factory's coming off (dented - and heavy) glas one's from Sled City going on. Will try and attach a picture of car if can. Could use some opinions on color for bumpers. Same as hood, Chrome paint (might look cheap), Silver, OR ? mopar enthusiast.jpg
 
Annual First spring ride

Went Hamilton,IL to Sullivan auctioneers preview.It was for their spring collector car auction.Some nice Mopars.Someone had alot of Buicks,Olds,&Pontiacs.Alot of nice rust free iron.Trying to get pics from phone.Dam thing never works,will download to 'puter and send lol:iamwithstupid:
 
Not today, but Saturday:

changed the spark plugs
new ignition coil
dist. cap/rotor
new edelbrock carb.
 
is she running anybetter ??

yeah, the dead miss / rough idle is gone (for now). a couple of the plugs were really badly fouled so that certainly wasn't helping. Carb kept backfiring and running way rich, so I just plunked down the $ for a new one (didn't wanna deal with the what if's of trying to rebuild a really bad carb) and i noticed a difference right away - hopefully that also stops fouling the plugs.

Now I need to find the correct 4 bbl throttle linkage - when the previous owner converted it from 2bbl to 4bbl, he just Mcgyvered the TL to work with the 4bbl set up.
 
Auction pics

Try to load pics of auction preview.Pics of dash is my ride to and from.Then added one of my clean machine after her bath when I got home.The 65 442 was a clean unit.Looks like it brought $16k:blob1:
 

Attachments

  • 2013 Sullivan auction 001.jpg
    2013 Sullivan auction 001.jpg
    10.6 KB · Views: 204
  • 2013 Sullivan auction 012.jpg
    2013 Sullivan auction 012.jpg
    20.9 KB · Views: 199
  • 2013 Sullivan auction 016.jpg
    2013 Sullivan auction 016.jpg
    16.2 KB · Views: 193
  • 2013 Sullivan auction 017.jpg
    2013 Sullivan auction 017.jpg
    18.5 KB · Views: 198
  • 2013 Sullivan auction 022.jpg
    2013 Sullivan auction 022.jpg
    20.2 KB · Views: 202
  • 2013 Sullivan auction 023.jpg
    2013 Sullivan auction 023.jpg
    15.8 KB · Views: 195
  • 2013 Sullivan auction 147.jpg
    2013 Sullivan auction 147.jpg
    95.7 KB · Views: 222
  • 2013 Sullivan auction 113.jpg
    2013 Sullivan auction 113.jpg
    96.6 KB · Views: 222
  • 2013 Sullivan auction 002.jpg
    2013 Sullivan auction 002.jpg
    22.8 KB · Views: 202
  • 2013 Sullivan auction 025.jpg
    2013 Sullivan auction 025.jpg
    20.9 KB · Views: 204
  • 2013 Sullivan auction 008.jpg
    2013 Sullivan auction 008.jpg
    23.5 KB · Views: 195
  • 2013 Sullivan auction 028.jpg
    2013 Sullivan auction 028.jpg
    19.2 KB · Views: 201
Made a trunk carpet mat for my 70 RR. Went to Lowes cut out a piece of black in-door/out-door carpeting. 6x7. Trimmed it to fit the way I wanted it to look. Works great. Cost $32.76. Have my "stock" trunk mat under it in case I want it to look original.

DSCF0786_zps3b084f5e.jpg
 
Picked up the gas for my new welder and some cleaning gel, extra roll of wire, ect... Things seem to be getting higher each time i replenish my garage stuff, im almost glad i have a small garage and don't do more cars then i do anymore.... almost sorry :)
 
put in some royal purple break in oil and installed the tach. slowly starting to be drivable again!!
 
Auto Transport Service
Back
Top