thanks, kinda scary cutting the braces out, used some self tapping drywall screws to hold the new steel in place, being twice as long I'm hoping the bow doesn't come back.
What did you do to your Mopar today?
- Thread starter MustangAndy
- Start date
67 Mopar
Well-Known Member
Picked up a new Battery Tray for the Charger!
It didn't have one in the past, just some old jury rigged piece of rusty sheet metal that was sorta welded on there.
It didn't have one in the past, just some old jury rigged piece of rusty sheet metal that was sorta welded on there.
67 Mopar
Well-Known Member
Strapped up all the fuel lines today after lunch. Fuel system is complete now, ready for test and leak checks.
I also put my gravel guard on the 3/8 CUNI hard lines running under the chassis. Like I told the fellas on the 1st Gen site, I used a 1" Electrical Shrink Tubing for that... the Heavy Duty stuff with the adhesive liner inside for industrial/Outdoor buried connections, etc...
I also put my gravel guard on the 3/8 CUNI hard lines running under the chassis. Like I told the fellas on the 1st Gen site, I used a 1" Electrical Shrink Tubing for that... the Heavy Duty stuff with the adhesive liner inside for industrial/Outdoor buried connections, etc...
67 Mopar
Well-Known Member
Set the rear end under the chassis on jack stands for now. I'll get the leaf springs installed tomorrow if I get the chance.
Vaanth
Well-Known Member
Installing new belt weatherstrips and door channel, cleaning and lubricating latches, lubricating the window regulators, tracks, etc. and reinstalling glass.
Similar threads
