Camshaft selection for Mild 440?

[Dusty997]

good data, the jump from small block to big block is so interesting.

 

[RJ Squirrel]

Another bump for the 6401, put one in my 440 Roadrunner and pretty happy with it.

 

[ckessel]

Check out Howards Cams. They have a selection called "Max Certified" in the cam/lifter packages. They run them through an additional cerification process to ensure the QC of the items. This line of units gets a 5 year, no questions asked warranty. I'd been looking at one of their other units for the 440 I'm putting together for my 67 wagon. When I saw and verified that the unit I was wanting, Torque Monster, was in this selection too, I ordered it. Have not run it yet in case anyone asks. Next year sometime. Check them out.

 

[toolmanmike]

Check out Howards Cams. They have a selection called "Max Certified" in the cam/lifter packages. They run them through an additional cerification process to ensure the QC of the items. This line of units gets a 5 year, no questions asked warranty. I'd been looking at one of their other units for the 440 I'm putting together for my 67 wagon. When I saw and verified that the unit I was wanting, Torque Monster, was in this selection too, I ordered it. Have not run it yet in case anyone asks. Next year sometime. Check them out.

They have a few good looking small block street cams I see. Thanks for the tip.

 

[Dusty997]

Another bump for the 6401, put one in my 440 Roadrunner and pretty happy with it.

factory converter? or are you running a higher stall

 

[toolmanmike]

factory converter? or are you running a higher stall

It is pretty duration heavy. 298/303. Fair idle 2-5500 range. 2000 rom converter and gearing recommended.

But, lobe separation is 114°