• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Caster and Camber

RR Fan Dan

If it ain’t broke, fix it till it is.
FBBO Gold Member
Local time
6:56 AM
Joined
Aug 18, 2024
Messages
4,291
Reaction score
8,382
Location
Virginia Chesapeake Bay
I know the b bodies like positive caster. From my understanding on another thread the 73/74 control arm set up allowed more caster than previous years which was an improvement. Most people are achieving between -3 to -4 degrees of castor. Is there a point where there is too much negative castor? In your experience, what's the ideal setting for caster and camber in a daily driver street car? Not for drag racing or road racing. What should I be looking to achieve on my 74RR.
 
I know the b bodies like positive caster. From my understanding on another thread the 73/74 control arm set up allowed more caster than previous years which was an improvement. Most people are achieving between -3 to -4 degrees of castor. Is there a point where there is too much negative castor? In your experience, what's the ideal setting for caster and camber in a daily driver street car? Not for drag racing or road racing. What should I be looking to achieve on my 74RR.
More negative caster steers easier but, tends to wander at speed. Too much, steers hard at low speed but, steadies that wheel at speed. We must have specs here in previous threads.
Mike
 
You want positive caster and any camber would be negative. 74 RR should be power steering right? 0 or neg caster would be for manual steering cars.

Alignment tech is going to have to tell you what they can get out of it. Caster +3-5*, adjust side to side for road crown, Camber -.5’ish*. 1/8” total toe.
 
You want positive caster and any camber would be negative. 74 RR should be power steering right? 0 or neg caster would be for manual steering cars.

Alignment tech is going to have to tell you what they can get out of it. Caster +3-5*, adjust side to side for road crown, Camber -.5’ish*. 1/8” total toe.
Thanks that was what I was looking for. It is power steering. Is there anything as too much caster. I’m assuming you can’t get there in these cars.
 
Thanks that was what I was looking for. It is power steering. Is there anything as too much caster. I’m assuming you can’t get there in these cars.
With excessive castor as the steering wheel is rotated the front of the car is raising and lowering.
Mike
 
Back
Top