Glenwood
Well-Known Member
- Local time
- 2:32 AM
- Joined
- Jun 19, 2015
- Messages
- 2,929
- Reaction score
- 2,848
- Location
- Kawartha Lakes, Ontario
I bought a Carter M6903 fuel pump and I'm not sure how to plumb it properly. I believe it has 1/4" NPT threads. The inlet (at the bottom?) would likely just be a barbed fitting for the hose from the supply 5/16" fuel line, but what about the line to the carb? The outlet does not have anything to seat a flare onto if a hard line is connected and I didn't really want to use a hose there. Any ideas?
inlet
outlet
inlet
outlet