1badmfm
Well-Known Member
So I really need some help i have a 1966 dodge coronet with a 1976 auto trans,, i bought a ready to run 1 wire HEI distributor that has coil built into it . I'm having problems wiring the starter relay.. right now the batt post on relay has a 10 gauge wire running to positive battery terminal and a fusible link going into bulkhead. The square sol. Terminal on relay has a wire going to the starter solenoid. And the main positive terminal from battery is going to large stud on starter. I have the ground terminal on relay ran to neg post of battery for now to bypass the Neutral safety switch. And finally the blue wire with tracer is hooked to ign terminal on relay. It will not crank or do anything .. what do I have wrong? Please help this wiring is supposed to be simple and get rid of the ign box, ballast, coil etc.