Did a leak down & compression test.Was not happy with the performance last weekend at Atco Dragway. It was very hot and humid but I was off more than the norm.......
What did you do to your Mopar today?
- Thread starter MustangAndy
- Start date
MrJLR
Jeff
mr. b
Well-Known Member
welded in left front frame rail and inner fender on the road runner
Sonny Black
Well-Known Member
my baby brother and I...received accolades...
Eric, 64 bel, Sonny ,etc...and more FBBO guys!
we will all get lay-ed tonight!
Eric, 64 bel, Sonny ,etc...and more FBBO guys!
we will all get lay-ed tonight!
Last edited:
Polara 500 707
Well-Known Member
Removed the supposedly “rebuilt” in 2010 383 out of the 64 yesterday. Mopar style, K member, motor, and lower suspension all at once. First time doing it and went smooth
71charger_fan
Well-Known Member
Replaced the cluster bezel in the '71 Charger SE and installed an electronic voltage limiter.
Drove 75 miles through rain to the WI Mopar Muscle Club show. Weather was good at the show. Hung out with Sonny Black, eric383, and a bunch of other friends down there. Our crew all took home hardware. Lots of fine cars there.
Ironbuilt
Well-Known Member
Go here for more pics:
https://www.forbbodiesonly.com/mopa...i-car-show-june-9-2019.174060/#post-911276946
https://www.forbbodiesonly.com/mopa...i-car-show-june-9-2019.174060/#post-911276946
Ironbuilt
Well-Known Member
Do you even have wipers that work?
I have hide away wipers
They are hidden in the garage
RainEX starts to work at 30MPH,that when the spool makes it start to skate
NoCar2023
Well-Known Member
Worked on the left fender yesterday. About 3/8 inch of filler on the top corner.
Prior body butcher made little/no effort to straighten it before filler.
The last pic is after hours of hammer, dolly and heat shrinking.
I think I am making it better? still have one stretched spot giving me trouble.
Prior body butcher made little/no effort to straighten it before filler.
The last pic is after hours of hammer, dolly and heat shrinking.
I think I am making it better? still have one stretched spot giving me trouble.
Last edited:
Back in the shop adding bed liner to the bottom of the car . . .
Didn't want to forget the under side of the rockers to "try" and help prevent some rock ships ( this car will be driven )
Got the second coat on the passenger side . . .
And second coat on the driver side too . . .
Didn't want to forget the under side of the rockers to "try" and help prevent some rock ships ( this car will be driven )
Got the second coat on the passenger side . . .
And second coat on the driver side too . . .
Wiped 29 years of crude off of a, rattle can paint job, engine. For those that say that stuff doesn't hold up... it's all in the prep work! 
Similar threads
