Search results for query: *

Hey all haven't been on the site for some time now however would like to get some feedback on an issue I am having with my steering not self correcting on my 1969 Super Bee. Last winter I had a reman. power steering box installed to replace my old worn one. I have taken the car in for a front...

Hello everybody. There is someone local selling what he says is a N.O.S. radiator shroud for a B Body 26 inch radiator to fit all B Body Mopars. I have looked on eBay and someone is selling a N.O.S. fan shroud of the same however embossed on the shroud is the same part number as the sticker on...

Hey Guys, have probably been on here previously with regard to finding a starter to fit my 440 with 218 step headers. Finally broke down and ordered a RobbMc however the site is a bit confusing as the picture of the starter shows a solenoid on the starter however it also shows a solenoid with a...

Well it seems I'm pretty much back to square one in locating a starter that will fit my 440 with 2 1/8 TTI step headers with proper clearance for air circulation. Called a few local places who sell and/or rebuild starters with every one giving a different starter type and tried these without...

I have a generation 1 RobbMc mini starter on my 440 with TTI headers. The problem I'm having is that the starter will engage intermittently. When the starter doesn't engage all you hear is a buzzing sound. The starter relay has been tested and shows to work correctly. As last resort the...

Hi. I was wondering if anyone knew why when a car is lifted off the ground on a hoist thus removing any weight on the tires why a leaf spring would buckle upward toward the underbody of the car which then causes the rear shackle to pull forward and jam against the frame where then you have to...

Has anyone installed an A body Mopar 4 speed into a B body or E body and what needs to be done to do the install.

Could someone please tell me how many U.S. quarts/pints a 1969 A833 4 speed transmission takes (both dry fill and re fill). My operators manual says 9 U.S. pints or 7 1/2 Imperial pints however a friend's operators manual says 7 1/2 pints without any reference to U.S or Imperial. My operators...

Has anyone heard of or used Harvest King conventional 90W API GL 4 gear oil in there A833 4 speeds and if yes what is your opinion of it's quality when used in a 1960s Muscle Car?

Are all original or Chrysler licensed oval six pack air cleaners stamped with the same part number regardless of year, engine size (340/440) and whether or not the air cleaner came on a Plymouth or a Dodge? Where are the part number(s) to be found on both the base or lid? Thank you.

On one of the corners on the back of my 1969 Super Bee A.M. radio there is a threaded metal stud which I am going to assume is to mount/secure the back of the radio to the underside of the dash however correct me if I am wrong. Is there anything besides the front bezel the only thing that...

Wanted: B Body A.M. F.M. radio with textured bezel to fit 1969 Super Bee. I have a 1953/54 Chevrolet Bel Air Green Tinted Rear Windshield For Trade. Prefer to deal in Canada.

Looking for a textured Rallye dash A.M. radio Bezel to fit my 1969 Super Bee. Let me know what you have. Thank you.

Hello everyone. First I would like to thank everyone for their input on whether or not the radio I pictured in my previous thread was original to or would be in a 1969 Super Bee. Now onto the next. I am looking for a brand new set of heater hoses that run from the heater box to the defroster...

Greetings. I have a question about the pictured radio. Does this look like the factory radio that would come in a 1969 Super Bee? Thank you in advance. If it is I plan on taking out the aftermarket radio and putting the factory one back in.

I was wondering if anybody has ever had any problems with their leaf spring flipping up side down as your back tires start to contact the floor when being lowered from a hoist. My Super Bee has 5 leaf springs on the left and 6 on the right. The Dana has been narrowed a bit to accommodate the...

Hey everyone. Sometime back I was asking if anyone knew of a cup that goes inside an aftermarket Mopar bellhousing that secures the nose of the starter where you can adjust for both a 10 1/2 or 11 inch flywheel. My Cousin just got this part delivered this morning and has installed it in my...

This is a picture of my clutch rod. It sits on a round pin/dowel which I assume is part of the fork that moves my release bearing back and forth engaging and disengaging my clutch disc. Is the hole in the clutch rod supposed to be oblong and the pin/dowel round or is my clutch rod worn or is...

O.K. searched around on the net trying to find the details of my motor and trans. There is a large casting number on both sides of the block 2536430-7 were on one site it said this is a 1966 to72 RB 440 block however no mention of what the -7 stood for. On the passenger side there is a casting...

Is TTI the brand name of a header or just the style of header and where would the markings be on the header to identify the brand? What different materials were available, if these headers are actually TTI, (steel/stainless steel/ceramic) when choosing the header or was there there only one...