What did you do to your Mopar today?

[mac]

finished tuning after getting a set of stealth heads on and the difference is amazing!!! i just wanted to keep driving.

 

[67 B-body]

Messed with an Electric fuel pump most of the afternoon.... Went down the road and back.... Put down a set of posi marks..... Didn't mean to burn out though! I was trying to see how far my Converter would flash.....

 

[greenmonsta79]

Priming the 72 Dart today getting ready to lay down some FC7 this next week!!!! Then sell it to buy more goodies for my 69 Charger!!!

 

[Al K]

I drove mine!:headbang: Went to a decent show in the little town of Elsie,Michigan. Had the only Mopar there. Also had a trouble-free day. Life is good!

 

[mccoymail]

I need some motivation guys. I started to repair my front inner fender and found out that my frone frame rail is holier thsn the Pope. Pretty bummed out...
options are:
1)scrap the new floors that are installed and use this car as parts while looking for a better shell
2)new frame rails
3)???

 

[mccoymail]

sorry about the spelling, drowning my sorrow in beer!
I need some motivation guys. I started to repair my front inner fender and found out that my front frame rail is holier than the Pope. Pretty bummed out...
options are:
1)scrap the new floors that are installed and use this car as parts while looking for a better shell
2)new frame rails
3)???

 

[copper67440]

I took my pieced together exhaust off getting ready to install new 3" header collectors and new Dynomax super turbo's my neighbor is giving me for free, well I watch his kids for about an hour or so maybe once a week. Thank you Chris. I need to pull my right front tire off, flat. Bad valve stem.

 

[Ron 73]

Washed and waxed...

 

[shag766]

fired up to new hemi engine. SWEET

 

[hemistix66]

got em out today

Went cruising with daughter. A Great Mopar day!:headbang:

 

[65hemi]

installed the new gas tank, sending unit, etc. in the 65 Belvedere.

 

[cdr]

ground out old bondo & cut peices to fill antenna holes in both frnt fenders welded them in ,repaired lft front fender nose area removed old bondo & welded up old bondo fastener holes.lol pulled the dent out properly & got filler sanded,primed left fender, someone back in the day must have mounted a cb ant on lft fender got this done on saturday,sunday hung fenders on car stuck frnt seat in so i could drive car to turn in oround in my shop,cleaned out shop

 

[redddd23]

Put my motor in this weekend!!!! ccasion14:

 

[roadrunnerman]

ground off the bondo on the b=pillar and sprayed a light coat of primer till i can fix it.

 

[Osyman]

Wired nss/back up lights and replaced a caliper

 

[6t4polara]

Started to winterize.

 

[shag766]

i gotta ask, what is the "mold"?

-
x2

 

[shag766]

Priming the 72 Dart today getting ready to lay down some FC7 this next week!!!! Then sell it to buy more goodies for my 69 Charger!!!

-
describe the dart, i am always looking. you just never know.

 

[Stumper]

Changed the valve cover breathers. I run Moroso breathers that are pulled into the header collectors. I had put on a set of pretty chrome ones some time back. At the time I knew they had a foam layer inside of the breather and knew I would need to clean them frequently - but I forgot about it. Each breather had about 1/2 oz of oil soaked up in that damn foam. I doubt they were working at all. Put the clean Morosos back on and took it to the cruise in tonight.. I like the looks og the chrome ones better so I'll have to look around for a set that doesn't have foam in them.

 

[Ron 73]

Put away for the winter hibernation period and some upgrades hopefully planned.