Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
My 67 Coronet wagon is needing the seal, which fits into a groove on the glass lift plate plus extends down between the glass and plate, which when raised seals off the gate opening on the outside horizontal edge of the gate. Looking through the parts book for 66 & 67, they list an inner but not...
I was checking out the master on my wagon, Doc's unit for front disc conversion 1 1/32" and it appears it may be leaking out the back. Was wet at the booster face but that made have been residual from a few days ago when I put on some better pads and topped off. Before the top off, there was...
Saw these earlier when I was updating the CL ads for my truck.
1969 - 1970 Plymouth Roadrunner Air Grabber hoods -very good original - auto parts - by owner - vehicle automotive...
big block mopar exhaust mainfold - auto parts - by owner - vehicle automotive sale - craigslist
big block mopar...
...They provide two different id grommets with them, 1/2" and 3/4". On the valve side I used the 3/4" and a mid to late 70's Chevy valve with the 90* end. On the air intake side, I knocked the hole into the filter base, used the 1/2" grommet from the cap[ 1 with each cap, so I had two to use]...
On my new acquisition, 67 Coronet deluxe wagon, looks like the sender needs to be replaced. There is a dead spot at just under 1/2 to a little under 1/4 tank. Was reading ok then I noticed the needle went well past E, stayed there for awhile, came back some then past E and finally stayed normal...
As some of you know, I've been on the hunt for a driver, mechanically sound 63-72 b-body wagon. Missed out on a couple plus a really nice 66 Monaco wagon. Even though wrong platform, was still nice. Since we were down in north San Diego county over the weekend, we did a detour on the way home to...
Here are some shots from today. Yesterday, it was no way. Too many people in the way so I didn't bother. Today wasn't as bad but still had some photo bombs. This 70 Challenger is first.
CoronetDarter and Kerndog have been dealing with some trans swap fun in the members restoration section. I had mentioned a thread from that "other" forum where similar/different issues had occurred on a gents GTS Dart and thought it would also be a good read for the brethren. Sometimes there is...
There is a 67 Coronet wagon for sale at Matthews Memory Lane I'm contemplating about buying. They are going to send me some photos of the underside of the car so I can potentially see if there are any rust issues going on. There are some issues noted when the emailed back to me, but it would be...
I saw this 69 yesterday morning at the Pismo Beach cars n coffee Saturday get together. 318, 3 on the tree. A guy from the UK had just picked this up. Somewhat local car with Vandenberg base tags on the windshield.
Since I'm not going to put the rear seat back in, I have the rear seat mount brackets available. Also some interior wire holders and a e-brake cable routing bracket. Just need postage costs covered.
Since I'm not getting any feedback in the engine/trans section, does anyone have any experience with the Pushbutton shifter conversion from Imperial Services? Looking for feedback on how it works and pics.
Imperial Services has a program where you send in your PB unit to be converted to a 66 on style trans. Anyone have any experience with this? Photos etc?
On the pre 65 units with the tapered axle, was there anyone doing axle conversions to switch out to flanged units? Or would you need to cut off and install new housing ends if you wanted to switch? Or just find a 65-7 housing? Thinking of a future project. Thank you bro's.
Anyone residing in P-Cola? I'm coming out his weekend, going to be there about 2 weeks to help out my BIL who recently had back surgery. Since not all of my time will involve helping him out, I wanted to take the opportunity to meet some Florida brethren.
I'm in the process of doing the USCT mini tubs on my 65 and need to back off the trunk torsion bars. The bars need to get pulled out of their respective brackets since those brackets get moved. What do I need to do to get them out? Lid is already off of course, have one hinge off but can't...