Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
FOR SALE
Original 1962 413 block that has been magna fluxed and checked for cracks that needs rebuilding.Block is 40 over now & comes with crank bearing caps.I have checked the number on the block and it is from 1962 and from the research I have done I still cant confirm the early 62 blocks to...
Hi guys, I'm thinking of changing out my front skinny's for a slightly wider and taller tire? The tires on the front now are only 25 inches tall and I was thinking of possibly using up to a 29 inch tall tire?? any suggestions or anyone know if that tall of a tire will fit???:blob1:
HI guys not sure if this is the right place to post this but here goes. I heading to Fort Myers Florida in February and was wondering if anyone knew of any wrecking yards that might have cars to pick from or any other good Mopar things in the area like swap meets??
Thanks in advance
2nd Quarter Results Email to Employees
Recently, a well-known athlete told an interviewer that his team was playing with “humble confidence.” The player went on to explain that while his team believed in its ability to contend for a championship, it would not forget the hard work and tremendous...
and I mean the rear end Dana 60 not your butt DOH!
I just picked up a new rear end for my car from Dr Diff and it has come from Strange Engineering bare steel.I'm going to paint it black but what steps should I follow to ensure the paint will stick to it and look good, Also do I paint it...
OK , I had no luck on the other forums and I KNOW!!! I should have asked here first DOH!@!!
I mounted a B&M shifter in my car and I cant figure out where to put the hole in the floor for the cable. The shaift is a rear exit cable and I dont want to just drill any hole as I want to avoid the...
Hi Guys I have a 62 plymouth that I want to put a 727 in it from the 70's and I dont have a tranny crossmember.What years of cars will the crossmember be the same as mine?? Also can I buy a new one somewhere??:blob1:
I just thought the masses might want to know how to get a 1050 Dominator to calm down on the rough idle. Been doing some reading and found if you change the Idle air bleeds to larger ones it will actually Idle decent. My engine was running very rich at idle and the air bleeds from the factory...
Hey guys I was watchig GEARZ this morning and the had a little segment about the difference E3 plugs make in torque and horsys?? Anyone spend the extra cash and run these plugs????? I ws debating weather or not to shell out the cash for them??
Let me know your thoughts on them please...
Hi guys, I'm curious about what different throttle linkage setups are out there? I run a Lokar cable linkage to the carb but I dont like the feel of it under my foot. it seems heavy and I was wondering about going to a solid rod and bellcrank style setup??? anyone have any pictures or...
How close can you have your rear tires to the leaf springs??? I have a set of 8' wide rims that are 4.5" back spaced and there might be a 8th of an inch from the rear springs??? what does every one think???
CHEERS!!!
I installed a tko600 in my 62 Plymouth and now I'm having trouble getting a decent ajustment out of the clutch(petals to close to the floor). I used there bell housing and it makes the z bar mount lower on an angle and I think it throws out the goemetry out of wack because of the angle. Has...
I was wondering if i should use this shroud that mounts through the rad core??? Its a new Griffin rad and i'm afraid to push those plastic mounts through it!!! any thoughts on it??? will it damage the rad???
I just received my FBBO decals for going gold, I would like to know where you guys are putting them on your car?? GOT PIC's???
thanks!:worthless_thread:
Just though I'd light up your day by posting these cpmparisons:
The price of Gas versus Printer Ink
All these examples do NOT imply that gasoline is cheap; it just illustrates how outrageous some prices are....
You will be really shocked by the last one!
(At least, I was...)...
I purchased a sled city max wedge hood scoop and I need to know how to figure out the placement?Anyone have any measurements as to placement on the hood? I run a single carb and I also wanted to know the best way to cut a nice clean hole in the hood?
I'm looking ot purchase a 5" inch tall max wedge scoop for my car and I have searched for days to find out who's scoop is the best looking and quailty, but I cant make a desision due to conflicting opinions from everyone? I dont want an aluminium one as there too much money so thats out! Can...