Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
...if there is any.
I'm looking for a specific pattern on a trunk mat for my '62 Dodge. I've seen it advertised for the '62 Plymouth but not for the Dodge. Is there a difference between the Dodge and Plymouth trunk? I've heard they both use the same trunk pan. Is this true? (I don't have a...
Took the '62 to a local show this morning for the first time. Today's wind chill was 40 degrees. Wasn't that comfortable and I only stayed till 12:00.
They were sponsoring the "Make a Wish" of Pennsylvania and Virginia. There were about fifty vehicles of all makes.
Received quite a bit of...
I'm installing the rubber roof rail seal on the '62 and I'm needing a couple of good pictures of exactly what it suppose to look like after the installation. My original was way too deteriorated to tell what was what. 1963 should be the same also.
I'm seeing on the new seal that there are two...
I thought I would share my experience, buying a Hardboard headliner for my '62 Dodge, Polara 500.
My original headliner was the hardboard type. Perforated hardboard covered with, what's called Bedford Cord. No one makes it.
So I thought I would just change it to a cloth and bow type...
I just ordered 225/70/15" for the front of my '62 Polara. The diameter supposedly is almost 28".
Now measuring 14" from the center of my hub to the front inside edge of the fender well, it's really tight. Hope I didn't screw up. I've been seeing a lot of 225s on 65s ect. I was wanting to keep...
I decided to post here instead of "electrical".
My '62 has a heavy green wire on the ammeter. Same side as the red wire. I was going to bypass the guage and was curious to what this wire goes to. Every wiring diagram I've looked at doesn't show this green wire. It's found again on the left kick...
Well I finally ran into a problem on the '62 assembly.
The e-brake cable comes out of the fender well, through the opening above the frame, then over the frame to the transmission cross member. I just can't tell in my picture, being so cruddy, if it goes under or over the brake line going to...
Getting close to firing up my 440. Doing a 20 min cam break-in. The trans is newly rebuilt also, origanal '62 727.
My question, are the internals operating the same when the trans is in neutral verses it being in neutral with the park engaged. I'm sure I have the shifter cable adjustment...
I'm about to remove the gas tank on my 1962 Dodge. Will the bracket on the filler tube pass down through the opening, or does the filler tube have to come out of the tank first?
Bought these at a swap meet and I thought I would give them a try. I plan on getting them blasted and coated if they work out.
Is there anything out there that has a bit more clearance before I break out the BFH?
No, I can't afford TTI.
One down tube is making contact with the starter. It's...
I've been watching the prices of the 1962 transmission mounts for sometime, just in case I would happen to need one in the future and wow, they must be made of gold! I don't know how many times I've Googled them, watched on FleaBay ect. and I've seen them from $200 up to $450! So today I was...
Chrysler Historical Services were not taking Build Record searches last year due to making some changes to their system. They are now up and running.
I sent my application for my 1962 Polara at the end of December and received my package today.
I received a copy the Build Record Certificate...
Looks kind of cheap. The background is printed. It's from? (Out of the country?) But a neat idea!
http://m.ebay.com/itm/1962-Dodge-Dart-440-watch-/182367476930?nav=SEARCH
I haven't completed my Fender tag decoding. I'm at a standstill. Any information would be appreciated. Fill in the blanks, double check what I have. (questions highlighted in blue)
Also, how do you figure out the fiscal year date for the SO Number. Thanks in Advance!
Fender Tag Decoded for...
I was doing some "surfing" and cam across this 2013 for sale add on a Indonesian website. I'd tell you more about it but I don't speak the language.
It's kind of a crazy setup, right hand drive, weird setup on the sideways mounted power brakes. Reverse lights mounted on the bottom set instead of...
I bought a 3 3/8 tach for my '62 and I'm trying to find a good mounting spot. On the top of the column is too tight. (steering wheel interference) Man, I don't want to drill any holes in the dash. Maybe under the dash would work. Just not real visible. I did see one mounted on the hump.
So, any...